|Home||» Products||» Muller Mixer||» Muller Mixer|
The Muller Mixer machine is used for thoroughly mixing the various ingredients like Coke Breeze, Fire Clay, Hard Pitch Refractory Brick etc. for the use of Refractory. The machine is suitable for mixing basic refractory powder of grain size 10 - 15mm. with moisture contain upto 10 -15%.
BASE FRAME : The muller is assembled on a heavy duty channel base Frame made of M.S. Channel with M.S. Pads properly machined.
ROLLERS : Graded Cast Iron, fitted with C.I. Tyre and Tapper Roller Bearings.
MIXING TABLE : M.S. Plate construction of with suitable linings rests on 4 legs. Both Base Frame and Vertical Column are bolted together and Pan Base is also bolted with Vertical Columns.
VERTICAL COLUMNS : 4 Nos. vertical columns, made of M.S. Channel with M.S. plate which are properly machined.
PAN : Pan dia is 2100mm. Bottom Pan is of thick M.S. plate and Pan made of M.S. Plate.
LINING FOR PAN : Made of M.S. plate.
LINING FOR PAN BASE : Made of M.S. plate.
VARIABLE ROLLER PRESSURE : Rollers are spring loaded to provided a range of variable mulling pressures.
PLOWS : Plows are M.S. plate with hard faced.
WATER SPRAYING SYSTEM : The machine is provided with the water spraying system with perforated M.S. Pipe line and Control valve, if required by you.
LUBRICATION : All bearings are provided with individual greased nipples for daily lubrication.
DUST & FUME ESTRACTION : We will provided the dust & fume extraction outlet pipe with flange at the top of the mixer cover, to connect the dust and fume extraction system pipe as per your site condition.
DISCHARGE : Bottom discharge type, there is a provision for manual as well as Pneumatic system to open the discharging door for discharging the material.
DRIVE : Below the mixing plate, a vertical type Gear Box Redicon / Elecon / New Allenbery make coupled with vertical shaft of the Mixer, Motor is driven by V-pulley and V-Belt.
1000 Kgs. / Batch
MOTOR & STARTER
50 H.P. 1440 R.P.M. Sq. Cage, T.E.F.C.